%APN3_PROCEEDINGS_FORM%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% TEMPLATE.TEX -- APN3 (2003) ASP Conference Proceedings template.
%
% Derived from ADASS VIII (98) ASP Conference Proceedings template
% Updated by N. Manset for ADASS IX (99), F. Primini for ADASS 2000,
% D.Bohlender for ADASS 2001, and H. Payne for ADASS XII and LaTeX2e.
%
% Use this template to create your proceedings paper in LaTeX format
% by following the instructions given below.  Much of the input will
% be enclosed by braces (i.e., { }).  The percent sign, "%", denotes
% the start of a comment; text after it will be ignored by LaTeX.  
% You might also notice in some of the examples below the use of "\ "
% after a period; this prevents LaTeX from interpreting the period as
% the end of a sentence and putting extra space after it.  
% 
% You should check your paper by processing it with LaTeX.  For
% details about how to run LaTeX as well as how to print out the User
% Guide, consult the README file.  You should also consult the sample
% LaTeX papers, sample1.tex and sample2.tex, for examples of including
% figures, html links, special symbols, and other advanced features.
%
% If you do not have access to the LaTeX software or a laser printer
% at your site, you can still prepare your paper following the
% instructions in the User Guide.  In such cases, the editors will
% process the file and make any necessary editorial adjustments.
% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% 
\documentclass[11pt,twoside]{article}  % Leave intact
\usepackage{adassconf}

% If you have the old LaTeX 2.09, and not the current LaTeX2e, comment
% out the \documentclass and \usepackage lines above and uncomment
% the following:

%\documentstyle[11pt,twoside,adassconf]{article}

\begin{document}   % Leave intact

%-----------------------------------------------------------------------
%			    Paper ID Code
%-----------------------------------------------------------------------
% Enter the proper paper identification code.  The ID code for your
% paper is the session number associated with your presentation as
% published in the official conference proceedings.  You can           
% find this number locating your abstract in the printed proceedings
% that you received at the meeting or on-line at the conference web
% site; the ID code is the letter/number sequence proceeding the title 
% of your presentation. 
%
% This will not appear in your paper; however, it allows different
% papers in the proceedings to cross-reference each other.  Note that
% you should only have one \paperID, and it should not include a
% trailing period.
%
% EXAMPLE: \paperID{O4-1}
% EXAMPLE: \paperID{P7-7}
%

\paperID{B1-2}
%%%% ID=B1-2

%-----------------------------------------------------------------------
%		            Paper Title 
%-----------------------------------------------------------------------
% Enter the title of the paper.
%
% EXAMPLE: \title{A Breakthrough in Astronomical Software Development}
% 
% If your title is so long as to fill the page header when you print it,
% then please supply a short form as a \titlemark.
%
% EXAMPLE: 
%  \title{Rapid Development for Distributed Computing, with Implications
%         for the Virtual Observatory}
%  \titlemark{Rapid Development for Distributed Computing}
%

\title{Linux BoF}
%\titlemark{ }

%-----------------------------------------------------------------------
%		          Authors of Paper
%-----------------------------------------------------------------------
% Enter the authors followed by their affiliations.  The \author and
% \affil commands may appear multiple times as necessary (see example
% below).  List each author by giving the first name or initials first
% followed by the last name.  Authors with the same affiliations
% should grouped together. 
%
% EXAMPLE: \author{Raymond Plante, Doug Roberts, 
%                  R.\ M.\ Crutcher\altaffilmark{1}}
%          \affil{National Center for Supercomputing Applications, 
%                 University of Illinois Urbana-Champaign, Urbana, IL
%                 61801}
%          \author{Tom Troland}
%          \affil{University of Kentucky}
%
%          \altaffiltext{1}{Astronomy Department, UIUC}
%
% In this example, the first three authors, "Plante", "Roberts", and
% "Crutcher" are affiliated with "NCSA".  "Crutcher" has an alternate 
% affiliation with the "Astronomy Department".  The fourth author,
% "Troland", is affiliated with "University of Kentucky"

\author{Anthony J. Ferro}
\affil{NICMOS Project, Steward Observatory, University of Arizona}

%-----------------------------------------------------------------------
%			 Contact Information
%-----------------------------------------------------------------------
% This information will not appear in the paper but will be used by
% the editors in case you need to be contacted concerning your
% submission.  Enter your name as the contact along with your email
% address.
% 
% EXAMPLE:  \contact{Dennis Crabtree}
%           \email{crabtree@cfht.hawaii.edu}
%

\contact{Anthony Ferro}
\email{tferro@as.arizona.edu}

%-----------------------------------------------------------------------
%		      Author Index Specification
%-----------------------------------------------------------------------
% Specify how each author name should appear in the author index.  The 
% \paindex{ } should be used to indicate the primary author, and the
% \aindex for all other co-authors.  You MUST use the following
% syntax: 
%
% SYNTAX:  \aindex{Lastname, F. M.}
% 
% where F is the first initial and M is the second initial (if
% used).  This guarantees that authors that appear in multiple papers
% will appear only once in the author index.  
%
% EXAMPLE: \paindex{Crabtree, D.}
%          \aindex{Manset, N.}        
%          \aindex{Veillet, C.}        
%
% NOTE: this information is also used to build the author list that
% appears in the table of contents.  Authors will be listed in the order
% of the \paindex and \aindex commmands.
%

\paindex{Ferro, A. J.}

%-----------------------------------------------------------------------
%		      Author list for page header	
%-----------------------------------------------------------------------
% Please supply a list of author last names for the page header. in
% one of these formats:
%
% EXAMPLES:
% \authormark{Lastname}
% \authormark{Lastname1 \& Lastname2}
% \authormark{Lastname1, Lastname2, ... \& LastnameN}
% \authormark{Lastname et al.}
%
% Use the "et al." form in the case of seven or more authors, or if
% the preferred form is too long to fit in the header.

\authormark{Ferro}

%-----------------------------------------------------------------------
%			Subject Index keywords
%-----------------------------------------------------------------------
% Enter a comma separated list of up to 6 keywords describing your
% paper.  These will NOT be printed as part of your paper; however,
% they will be used to generate the subject index for the proceedings.
% There is no standard list; however, you can consult the indices
% for past proceedings (http://adass.org/adass/proceedings/).
%
% EXAMPLE:  \keywords{visualization, astronomy: radio, parallel
%                     computing, AIPS++, Galactic Center}
%
% In this example, the author noticed that "radio astronomy" appeared
% in the ADASS VII Index as "astronomy" being the major keyword and
% "radio" as the minor keyword.  The colon is used to introduce another
% level into the index.

\keywords{bof, linux }

%-----------------------------------------------------------------------
%			       Abstract
%-----------------------------------------------------------------------
% Type abstract in the space below.  Consult the User Guide and Latex
% Information file for a list of supported macros (e.g. for typesetting 
% special symbols). Do not leave a blank line between \begin{abstract} 
% and the start of your text.

\begin{abstract}          % Leave intact
% Place the text of your abstract here - NO BLANK LINES
During the conference a group of attendees 
held  a BoF session
to discuss the use of (GNU/)Linux  and related 
applications in astronomical institutions.
\end{abstract}

%-----------------------------------------------------------------------
%			      Main Body
%-----------------------------------------------------------------------
% Place the text for the main body of the paper here.  You should use
% the \section command to label the various sections; use of
% \subsection is optional.  Significant words in section titles should
% be capitalized.  Sections and subsections will be numbered
% automatically. 
%
% EXAMPLE:  \section{Introduction}
%           ...
%           \subsection{Our View of the World}
%           ...
%           \section{A New Approach}
%
% It is recommended that you look at the sample papers, sample1.tex
% and sample2.tex, for examples for formatting references, footnotes,
% figures, equations, html links, lists, and other special features.  

\section*{BoF Report}

The Birds of a Feather session was quite well attended, with over 50
people showing up.  Many of these attendees were still around at the end of
the session.

The discussion started with a brief presentation on Linux clusters by
Ken Mighell.  This was followed by a led discussion of the various ways
Linux is used at astronomical facilities. 
Other issues which were discussed included
management issues for large installations, 
hardware support problems and security concerns.

One of the largest discussions involved the impending end of the 
Red Hat Linux distribution, used by about half the attendees, and the
uncertainties presented by the switch to Fedora Core or other distributions.





%-----------------------------------------------------------------------
%			      References
%-----------------------------------------------------------------------
% List your references below within the reference environment
% (i.e. between the \begin{references} and \end{references} tags).
% Each new reference should begin with a \reference command which sets
% up the proper indentation.  Observe the following order when listing
% bibliographical information for each reference:  author name(s),
% publication year, journal name, volume, and page number for
% articles.  Note that many journal names are available as macros; see
% the User Guide listing "macro-ized" journals.   
%
% EXAMPLE:  \reference Hagiwara, K., \& Zeppenfeld, D.\  1986, 
%                Nucl.Phys., 274, 1
%           \reference H\'enon, M.\  1961, Ann.d'Ap., 24, 369
%           \reference King, I.\ R.\  1966, \aj, 71, 276
%           \reference King, I.\ R.\  1975, in Dynamics of Stellar 
%                Systems, ed.\ A.\ Hayli (Dordrecht: Reidel), 99
%           \reference Tody, D.\  1998, \adassvii, 146
%           \reference Zacharias, N.\ \& Zacharias, M.\ 2003,
%                \adassxii, \paperref{P7.6}
% 
% Note the following tricks used in the example above:
%
%   o  \& is used to format an ampersand symbol (&).
%   o  \'e puts an accent agu over the letter e.  See the User Guide
%      and the sample files for details on formatting special
%      characters.  
%   o  "\ " after a period prevents LaTeX from interpreting the period 
%      as an end of a sentence.
%   o  \aj is a macro that expands to "Astron. J."  See the User Guide
%      for a full list of journal macros
%   o  \adassvii is a macro that expands to the full title, editor,
%      and publishing information for the ADASS VII conference
%      proceedings.  Such macros are defined for ADASS conferences I
%      through XI.
%   o  When referencing a paper in the current volume, use the
%      \adassxii and \paperref macros.  The argument to \paperref is
%      the paper ID code for the paper you are referencing.  See the 
%      note in the "Paper ID Code" section above for details on how to 
%      determine the paper ID code for the paper you reference.  
%
%\begin{references}




%\end{references}

% Do not place any material after the references section

\end{document}  % Leave intact
