Conversion of standardized ReadMe file for
file /./ftp/cats/J/A_A/613/A40 into FORTRAN code for loading all data files into arrays.
Note that special values are assigned to unknown or unspecified
numbers (also called NULL numbers);
when necessary, the coordinate components making up the right ascension
and declination are converted into floating-point numbers
representing these angles in degrees.
program load_ReadMe
C=============================================================================
C F77-compliant program generated by readme2f_1.81 (2015-09-23), on 2024-Apr-18
C=============================================================================
* This code was generated from the ReadMe file documenting a catalogue
* according to the "Standard for Documentation of Astronomical Catalogues"
* currently in use by the Astronomical Data Centers (CDS, ADC, A&A)
* (see full documentation at URL http://vizier.u-strasbg.fr/doc/catstd.htx)
* Please report problems or questions to
C=============================================================================
implicit none
* Unspecified or NULL values, generally corresponding to blank columns,
* are assigned one of the following special values:
* rNULL__ for unknown or NULL floating-point values
* iNULL__ for unknown or NULL integer values
real*4 rNULL__
integer*4 iNULL__
parameter (rNULL__=--2147483648.) ! NULL real number
parameter (iNULL__=(-2147483647-1)) ! NULL int number
integer idig ! testing NULL number
C=============================================================================
Cat. J/A+A/613/A40 PACS photometry of FIR faint stars (Klaas+, 2018)
*================================================================================
*Herschel-PACS photometry of faint stars for sensitivity performance assessment
*and establishment of faint FIR primary photometric standards.
* Klaas U., Balog Z., Nielbock M., Mueller T.G., Linz H., Kiss Cs.
* <Astron. Astrophys. 613, A40 (2018)>
* =2018A&A...613A..40K (SIMBAD/NED BibCode)
C=============================================================================
C Internal variables
integer*4 i__
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'stars.dat' ! List of FIR faint stars
integer*4 nr__
parameter (nr__=17) ! Number of records
character*33 ar__ ! Full-size record
C J2000 position composed of: RAh RAm RAs DE- DEd DEm DEs
real*8 RAdeg (nr__) ! (deg) Right Ascension J2000
real*8 DEdeg (nr__) ! (deg) Declination J2000
C ---------------------------------- ! (position vector(s) in degrees)
integer*4 RAh (nr__) ! (h) Simbad right ascension (J2000)
integer*4 RAm (nr__) ! (min) Simbad right ascension (J2000)
real*4 RAs (nr__) ! (s) Simbad right ascension (J2000)
character*1 DE_ (nr__) ! Simbad declination sign (J2000)
integer*4 DEd (nr__) ! (deg) Simbad declination (J2000)
integer*4 DEm (nr__) ! (arcmin) Simbad declination (J2000)
real*4 DEs (nr__) ! (arcsec) Simbad declination (J2000)
character*9 Name (nr__) ! Star name
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'tablea3.dat' ! PACS 70um scan map photometry of FIR faint stars
integer*4 nr__1
parameter (nr__1=113) ! Number of records
character*110 ar__1 ! Full-size record
character*22 OBSID (nr__1) ! Herschel individual observation ID or
* combination of IDs
integer*4 OD (nr__1) ! Herschel Operational Day
character*9 Name_1 (nr__1) ! Star name
character*1 gain (nr__1) ! [h/l] PACS bolometer gain setting h(igh)/l(ow)
integer*4 Speed (nr__1) ! (arcsec/s) Herschel telescope scan speed
integer*4 Rep (nr__1) ! No. of scan map repetitions
integer*4 Length (nr__1) ! (arcsec) Parameter of scan map, scan leg length
integer*4 Sep (nr__1) ! (arcsec) Parameter of scan map, scan leg separation
integer*4 Nlegs (nr__1) ! Parameter of scan map, number of scan leg
character*6 Sangle (nr__1) ! (deg) Orientation(s) of detector array
* wrt. scan direction
real*4 Faper (nr__1) ! (mJy) Flux measured inside photometric aperture
real*4 sigpix (nr__1) ! (mJy) 1 sigma noise per pixel (1)
real*4 e_Faper (nr__1) ! (mJy) 1 sigma noise for photometric aperture
* including correction for correlated noise (1)
character*4 S_N (nr__1) ! Signal-to-noise ratio of flux measurement (1)
real*4 Fstar (nr__1) ! (mJy) Stellar flux (color corrected)
real*4 Wmax (nr__1) ! (arcsec) Maximum FWHM of elliptical fit to PSF
real*4 Wmin (nr__1) ! (arcsec) Minimum FWHM of elliptical fit to PSF
real*4 Wunc (nr__1) ! (arcsec) Uncertainty of elliptical fit to PSF
*Note (1): After OD 1375 half of the red photometer array was lost, resulting
* in increased noise sigpix, sigaper and reduced S/N wrt. pre-OD 1375
* 160um observations.
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'tablea4.dat' ! PACS 100um scan map photometry of FIR faint stars
integer*4 nr__2
parameter (nr__2=112) ! Number of records
character*110 ar__2 ! Full-size record
character*22 OBSID_1 (nr__2) ! Herschel individual observation ID or
* combination of IDs
integer*4 OD_1 (nr__2) ! Herschel Operational Day
character*9 Name_2 (nr__2) ! Star name
character*1 gain_1 (nr__2) ! [h/l] PACS bolometer gain setting h(igh)/l(ow)
integer*4 Speed_1 (nr__2) ! (arcsec/s) Herschel telescope scan speed
integer*4 Rep_1 (nr__2) ! No. of scan map repetitions
integer*4 Length_1 (nr__2) ! (arcsec) Parameter of scan map, scan leg length
integer*4 Sep_1 (nr__2) ! (arcsec) Parameter of scan map, scan leg separation
integer*4 Nlegs_1 (nr__2) ! Parameter of scan map, number of scan leg
character*6 Sangle_1 (nr__2) ! (deg) Orientation(s) of detector array
* wrt. scan direction
real*4 Faper_1 (nr__2) ! (mJy) Flux measured inside photometric aperture
real*4 sigpix_1 (nr__2) ! (mJy) 1 sigma noise per pixel (1)
real*4 e_Faper_1 (nr__2) ! (mJy) 1 sigma noise for photometric aperture
* including correction for correlated noise (1)
character*4 S_N_1 (nr__2) ! Signal-to-noise ratio of flux measurement (1)
real*4 Fstar_1 (nr__2) ! (mJy) Stellar flux (color corrected)
real*4 Wmax_1 (nr__2) ! (arcsec) Maximum FWHM of elliptical fit to PSF
real*4 Wmin_1 (nr__2) ! (arcsec) Minimum FWHM of elliptical fit to PSF
real*4 Wunc_1 (nr__2) ! (arcsec) Uncertainty of elliptical fit to PSF
*Note (1): After OD 1375 half of the red photometer array was lost, resulting
* in increased noise sigpix, sigaper and reduced S/N wrt. pre-OD 1375
* 160um observations.
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'tablea5.dat' ! PACS 160um scan map photometry of FIR faint stars
integer*4 nr__3
parameter (nr__3=175) ! Number of records
character*110 ar__3 ! Full-size record
character*22 OBSID_2 (nr__3) ! Herschel individual observation ID or
* combination of IDs
integer*4 OD_2 (nr__3) ! Herschel Operational Day
character*9 Name_3 (nr__3) ! Star name
character*1 gain_2 (nr__3) ! [h/l] PACS bolometer gain setting h(igh)/l(ow)
integer*4 Speed_2 (nr__3) ! (arcsec/s) Herschel telescope scan speed
integer*4 Rep_2 (nr__3) ! No. of scan map repetitions
integer*4 Length_2 (nr__3) ! (arcsec) Parameter of scan map, scan leg length
integer*4 Sep_2 (nr__3) ! (arcsec) Parameter of scan map, scan leg separation
integer*4 Nlegs_2 (nr__3) ! Parameter of scan map, number of scan leg
character*6 Sangle_2 (nr__3) ! (deg) Orientation(s) of detector array
* wrt. scan direction
real*4 Faper_2 (nr__3) ! (mJy) Flux measured inside photometric aperture
real*4 sigpix_2 (nr__3) ! (mJy) 1 sigma noise per pixel (1)
real*4 e_Faper_2 (nr__3) ! (mJy) 1 sigma noise for photometric aperture
* including correction for correlated noise (1)
character*4 S_N_2 (nr__3) ! Signal-to-noise ratio of flux measurement (1)
real*4 Fstar_2 (nr__3) ! (mJy) Stellar flux (color corrected)
real*4 Wmax_2 (nr__3) ! (arcsec) Maximum FWHM of elliptical fit to PSF
real*4 Wmin_2 (nr__3) ! (arcsec) Minimum FWHM of elliptical fit to PSF
real*4 Wunc_2 (nr__3) ! (arcsec) Uncertainty of elliptical fit to PSF
*Note (1): After OD 1375 half of the red photometer array was lost, resulting
* in increased noise sigpix, sigaper and reduced S/N wrt. pre-OD 1375
* 160um observations.
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'tableb1.dat' ! PACS 70um chop/nod photometry of FIR faint stars
integer*4 nr__4
parameter (nr__4=34) ! Number of records
character*86 ar__4 ! Full-size record
character*10 OBSID_3 (nr__4) ! Herschel individual observation ID
real*8 OD_3 (nr__4) ! Herschel Operational Day plus fraction
character*9 Name_4 (nr__4) ! Star name
character*1 gain_3 (nr__4) ! [h/l] PACS bolometer gain setting: h(igh)/l(ow)
character*1 Dither (nr__4) ! [y/n] Chopper dither pattern: y(es)/n(o)
integer*4 Rep_3 (nr__4) ! No. of chop/nod pattern repetitions
real*4 Fpeak (nr__4) ! (mJy) Fitted peak flux
real*4 Faper_3 (nr__4) ! (mJy) Flux measured inside photometric aperture
real*4 sigpix_3 (nr__4) ! (mJy) 1 sigma noise per pixel
real*4 e_Faper_3 (nr__4) ! (mJy) 1 sigma noise for photometric aperture
* including correction for correlated noise
character*3 S_N_3 (nr__4) ! Signal-to-noise ratio of flux measurement
real*4 Fstar_3 (nr__4) ! (mJy) Stellar flux (color corrected)
real*4 Wmax_3 (nr__4) ! (arcsec) Maximum FWHM of elliptical fit to PSF
real*4 Wmin_3 (nr__4) ! (arcsec) Minimum FWHM of elliptical fit to PSF
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'tableb2.dat' ! PACS 100um chop/nod photometry of FIR faint stars
integer*4 nr__5
parameter (nr__5=24) ! Number of records
character*86 ar__5 ! Full-size record
character*10 OBSID_4 (nr__5) ! Herschel individual observation ID
real*8 OD_4 (nr__5) ! Herschel Operational Day plus fraction
character*9 Name_5 (nr__5) ! Star name
character*1 gain_4 (nr__5) ! [h/l] PACS bolometer gain setting: h(igh)/l(ow)
character*1 Dither_1 (nr__5) ! [y/n] Chopper dither pattern: y(es)/n(o)
integer*4 Rep_4 (nr__5) ! No. of chop/nod pattern repetitions
real*4 Fpeak_1 (nr__5) ! (mJy) Fitted peak flux
real*4 Faper_4 (nr__5) ! (mJy) Flux measured inside photometric aperture
real*4 sigpix_4 (nr__5) ! (mJy) 1 sigma noise per pixel
real*4 e_Faper_4 (nr__5) ! (mJy) 1 sigma noise for photometric aperture
* including correction for correlated noise
character*3 S_N_4 (nr__5) ! Signal-to-noise ratio of flux measurement
real*4 Fstar_4 (nr__5) ! (mJy) Stellar flux (color corrected)
real*4 Wmax_4 (nr__5) ! (arcsec) Maximum FWHM of elliptical fit to PSF
real*4 Wmin_4 (nr__5) ! (arcsec) Minimum FWHM of elliptical fit to PSF
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'tableb3.dat' ! PACS 160um chop/nod photometry of FIR faint stars
integer*4 nr__6
parameter (nr__6=32) ! Number of records
character*86 ar__6 ! Full-size record
character*10 OBSID_5 (nr__6) ! Herschel individual observation ID
real*8 OD_5 (nr__6) ! Herschel Operational Day plus fraction
character*9 Name_6 (nr__6) ! Star name
character*1 gain_5 (nr__6) ! [h/l] PACS bolometer gain setting: h(igh)/l(ow)
character*1 Dither_2 (nr__6) ! [y/n] Chopper dither pattern: y(es)/n(o)
integer*4 Rep_5 (nr__6) ! No. of chop/nod pattern repetitions
real*4 Fpeak_2 (nr__6) ! (mJy) Fitted peak flux
real*4 Faper_5 (nr__6) ! (mJy) Flux measured inside photometric aperture
real*4 sigpix_5 (nr__6) ! (mJy) 1 sigma noise per pixel
real*4 e_Faper_5 (nr__6) ! (mJy) 1 sigma noise for photometric aperture
* including correction for correlated noise
character*3 S_N_5 (nr__6) ! Signal-to-noise ratio of flux measurement
real*4 Fstar_5 (nr__6) ! (mJy) Stellar flux (color corrected)
real*4 Wmax_5 (nr__6) ! (arcsec) Maximum FWHM of elliptical fit to PSF
real*4 Wmin_5 (nr__6) ! (arcsec) Minimum FWHM of elliptical fit to PSF
C=============================================================================
C Loading file 'stars.dat' ! List of FIR faint stars
C Format for file interpretation
1 format(I2,1X,I2,1X,F5.2,1X,A1,I2,1X,I2,1X,F4.1,1X,A9)
C Effective file loading
open(unit=1,status='old',file=
+'stars.dat')
write(6,*) '....Loading file: stars.dat'
do i__=1,17
read(1,'(A33)')ar__
read(ar__,1)
+ RAh(i__),RAm(i__),RAs(i__),DE_(i__),DEd(i__),DEm(i__),
+ DEs(i__),Name(i__)
RAdeg(i__) = rNULL__
DEdeg(i__) = rNULL__
c Derive coordinates RAdeg and DEdeg from input data
c (RAdeg and DEdeg are set to rNULL__ when unknown)
if(RAh(i__) .GT. -180) RAdeg(i__)=RAh(i__)*15.
if(RAm(i__) .GT. -180) RAdeg(i__)=RAdeg(i__)+RAm(i__)/4.
if(RAs(i__) .GT. -180) RAdeg(i__)=RAdeg(i__)+RAs(i__)/240.
if(DEd(i__) .GE. 0) DEdeg(i__)=DEd(i__)
if(DEm(i__) .GE. 0) DEdeg(i__)=DEdeg(i__)+DEm(i__)/60.
if(DEs(i__) .GE. 0) DEdeg(i__)=DEdeg(i__)+DEs(i__)/3600.
if(DE_(i__).EQ.'-'.AND.DEdeg(i__).GE.0) DEdeg(i__)=-DEdeg(i__)
c ..............Just test output...........
write(6,1)
+ RAh(i__),RAm(i__),RAs(i__),DE_(i__),DEd(i__),DEm(i__),
+ DEs(i__),Name(i__)
write(6,'(6H Pos: 2F8.4)') RAdeg(i__),DEdeg(i__)
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'tablea3.dat' ! PACS 70um scan map photometry of FIR faint stars
C Format for file interpretation
2 format(
+ A22,1X,I4,1X,A9,1X,A1,1X,I2,1X,I2,1X,I3,1X,I2,1X,I2,1X,A6,1X,
+ F6.1,1X,F5.3,1X,F5.2,1X,A4,1X,F6.1,1X,F5.2,1X,F5.2,1X,F4.2)
C Effective file loading
open(unit=1,status='old',file=
+'tablea3.dat')
write(6,*) '....Loading file: tablea3.dat'
do i__=1,113
read(1,'(A110)')ar__1
read(ar__1,2)
+ OBSID(i__),OD(i__),Name_1(i__),gain(i__),Speed(i__),Rep(i__),
+ Length(i__),Sep(i__),Nlegs(i__),Sangle(i__),Faper(i__),
+ sigpix(i__),e_Faper(i__),S_N(i__),Fstar(i__),Wmax(i__),
+ Wmin(i__),Wunc(i__)
c ..............Just test output...........
write(6,2)
+ OBSID(i__),OD(i__),Name_1(i__),gain(i__),Speed(i__),Rep(i__),
+ Length(i__),Sep(i__),Nlegs(i__),Sangle(i__),Faper(i__),
+ sigpix(i__),e_Faper(i__),S_N(i__),Fstar(i__),Wmax(i__),
+ Wmin(i__),Wunc(i__)
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'tablea4.dat' ! PACS 100um scan map photometry of FIR faint stars
C Format for file interpretation
3 format(
+ A22,1X,I4,1X,A9,1X,A1,1X,I2,1X,I2,1X,I3,1X,I2,1X,I2,1X,A6,1X,
+ F6.1,1X,F5.3,1X,F5.2,1X,A4,1X,F6.1,1X,F5.2,1X,F5.2,1X,F4.2)
C Effective file loading
open(unit=1,status='old',file=
+'tablea4.dat')
write(6,*) '....Loading file: tablea4.dat'
do i__=1,112
read(1,'(A110)')ar__2
read(ar__2,3)
+ OBSID_1(i__),OD_1(i__),Name_2(i__),gain_1(i__),Speed_1(i__),
+ Rep_1(i__),Length_1(i__),Sep_1(i__),Nlegs_1(i__),
+ Sangle_1(i__),Faper_1(i__),sigpix_1(i__),e_Faper_1(i__),
+ S_N_1(i__),Fstar_1(i__),Wmax_1(i__),Wmin_1(i__),Wunc_1(i__)
c ..............Just test output...........
write(6,3)
+ OBSID_1(i__),OD_1(i__),Name_2(i__),gain_1(i__),Speed_1(i__),
+ Rep_1(i__),Length_1(i__),Sep_1(i__),Nlegs_1(i__),
+ Sangle_1(i__),Faper_1(i__),sigpix_1(i__),e_Faper_1(i__),
+ S_N_1(i__),Fstar_1(i__),Wmax_1(i__),Wmin_1(i__),Wunc_1(i__)
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'tablea5.dat' ! PACS 160um scan map photometry of FIR faint stars
C Format for file interpretation
4 format(
+ A22,1X,I4,1X,A9,1X,A1,1X,I2,1X,I2,1X,I3,1X,I2,1X,I2,1X,A6,1X,
+ F6.1,1X,F5.3,1X,F5.2,1X,A4,1X,F6.1,1X,F5.2,1X,F5.2,1X,F4.2)
C Effective file loading
open(unit=1,status='old',file=
+'tablea5.dat')
write(6,*) '....Loading file: tablea5.dat'
do i__=1,175
read(1,'(A110)')ar__3
read(ar__3,4)
+ OBSID_2(i__),OD_2(i__),Name_3(i__),gain_2(i__),Speed_2(i__),
+ Rep_2(i__),Length_2(i__),Sep_2(i__),Nlegs_2(i__),
+ Sangle_2(i__),Faper_2(i__),sigpix_2(i__),e_Faper_2(i__),
+ S_N_2(i__),Fstar_2(i__),Wmax_2(i__),Wmin_2(i__),Wunc_2(i__)
c ..............Just test output...........
write(6,4)
+ OBSID_2(i__),OD_2(i__),Name_3(i__),gain_2(i__),Speed_2(i__),
+ Rep_2(i__),Length_2(i__),Sep_2(i__),Nlegs_2(i__),
+ Sangle_2(i__),Faper_2(i__),sigpix_2(i__),e_Faper_2(i__),
+ S_N_2(i__),Fstar_2(i__),Wmax_2(i__),Wmin_2(i__),Wunc_2(i__)
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'tableb1.dat' ! PACS 70um chop/nod photometry of FIR faint stars
C Format for file interpretation
5 format(
+ A10,1X,F10.6,1X,A9,1X,A1,1X,A1,1X,I2,1X,F6.3,1X,F6.1,1X,F5.3,
+ 1X,F4.1,1X,A3,1X,F6.1,1X,F5.2,1X,F5.2)
C Effective file loading
open(unit=1,status='old',file=
+'tableb1.dat')
write(6,*) '....Loading file: tableb1.dat'
do i__=1,34
read(1,'(A86)')ar__4
read(ar__4,5)
+ OBSID_3(i__),OD_3(i__),Name_4(i__),gain_3(i__),Dither(i__),
+ Rep_3(i__),Fpeak(i__),Faper_3(i__),sigpix_3(i__),
+ e_Faper_3(i__),S_N_3(i__),Fstar_3(i__),Wmax_3(i__),Wmin_3(i__)
c ..............Just test output...........
write(6,5)
+ OBSID_3(i__),OD_3(i__),Name_4(i__),gain_3(i__),Dither(i__),
+ Rep_3(i__),Fpeak(i__),Faper_3(i__),sigpix_3(i__),
+ e_Faper_3(i__),S_N_3(i__),Fstar_3(i__),Wmax_3(i__),Wmin_3(i__)
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'tableb2.dat' ! PACS 100um chop/nod photometry of FIR faint stars
C Format for file interpretation
6 format(
+ A10,1X,F10.6,1X,A9,1X,A1,1X,A1,1X,I2,1X,F6.3,1X,F6.1,1X,F5.3,
+ 1X,F4.1,1X,A3,1X,F6.1,1X,F5.2,1X,F5.2)
C Effective file loading
open(unit=1,status='old',file=
+'tableb2.dat')
write(6,*) '....Loading file: tableb2.dat'
do i__=1,24
read(1,'(A86)')ar__5
read(ar__5,6)
+ OBSID_4(i__),OD_4(i__),Name_5(i__),gain_4(i__),Dither_1(i__),
+ Rep_4(i__),Fpeak_1(i__),Faper_4(i__),sigpix_4(i__),
+ e_Faper_4(i__),S_N_4(i__),Fstar_4(i__),Wmax_4(i__),Wmin_4(i__)
c ..............Just test output...........
write(6,6)
+ OBSID_4(i__),OD_4(i__),Name_5(i__),gain_4(i__),Dither_1(i__),
+ Rep_4(i__),Fpeak_1(i__),Faper_4(i__),sigpix_4(i__),
+ e_Faper_4(i__),S_N_4(i__),Fstar_4(i__),Wmax_4(i__),Wmin_4(i__)
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'tableb3.dat' ! PACS 160um chop/nod photometry of FIR faint stars
C Format for file interpretation
7 format(
+ A10,1X,F10.6,1X,A9,1X,A1,1X,A1,1X,I2,1X,F6.3,1X,F6.1,1X,F5.3,
+ 1X,F4.1,1X,A3,1X,F6.1,1X,F5.2,1X,F5.2)
C Effective file loading
open(unit=1,status='old',file=
+'tableb3.dat')
write(6,*) '....Loading file: tableb3.dat'
do i__=1,32
read(1,'(A86)')ar__6
read(ar__6,7)
+ OBSID_5(i__),OD_5(i__),Name_6(i__),gain_5(i__),Dither_2(i__),
+ Rep_5(i__),Fpeak_2(i__),Faper_5(i__),sigpix_5(i__),
+ e_Faper_5(i__),S_N_5(i__),Fstar_5(i__),Wmax_5(i__),Wmin_5(i__)
c ..............Just test output...........
write(6,7)
+ OBSID_5(i__),OD_5(i__),Name_6(i__),gain_5(i__),Dither_2(i__),
+ Rep_5(i__),Fpeak_2(i__),Faper_5(i__),sigpix_5(i__),
+ e_Faper_5(i__),S_N_5(i__),Fstar_5(i__),Wmax_5(i__),Wmin_5(i__)
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
stop
end